Toshiba Portege A600 - Manual (Page 168)

User’s Manual 8-11
Troubleshooting
SD/SDHC memory card
For further information, please refer to Chapter 3, Hardware, Utilities and
Options .
Pointing device
If you are using a USB mouse, you should also refer to both the USB
device section in this chapter, and the documentation supplied with your
mouse.
Touch Pad
Problem Procedure
SD/SDHC memory card
error occurs
Remove the SD/SDHC memory card from the
computer and then reinsert it in order to ensure it
is firmly connected.
If the problem persists, then you should refer to
the documentation supplied with your SD/SDHC
memory card for further information.
You cannot write to an
SD/SDHC memory card
Remove the SD/SDHC memory card from the
computer and check to ensure that it is not write
protected.
You cannot read a file Check to ensure the required file is actually on
the SD/SDHC memory card that is inserted into
the computer.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Problem Procedure
On-screen pointer does
not respond to pointing
device operation
In this instance the system might be busy - Try
moving the mouse again after waiting a short
while.
Double-tapping does
not work
In this instance, you should initially try changing
the double-click speed setting within the Mouse
Control utility.
1. To access this utility, click Start Control
Panel Hardware and Sound Mouse.
2. Within the Mouse Properties window, click
the Buttons tab.
3. Set the double-click speed as required and
click OK.