Toshiba Portege A600 - Manual (Page 114)

User’s Manual 4-27
Operating Basics
■ Apply impact or vibration to the computer.
■ Install, remove or connect external devices, including such items as an
ExpressCard, SD/SDHC memory card, USB device, external monitor,
or an optical digital device.
■ Use the audio/video control button to reproduce music or voice.
■ Open the optical disc drive.
■ Do not use shut down, log off, Sleep Mode or Hibernation Mode
functions while writing or rewriting.
■ Make sure that the write/rewrite operation is completed before going
into either Sleep Mode or Hibernation Mode (writing is completed if you
can remove an optical media on the optical disc drive).
■ If the media is of poor quality, or is dirty or damaged, writing or rewriting
errors may occur.
■ Set the computer on a level surface and avoid places subject to
vibration such as airplanes, trains or cars. In addition, do not use the
computer on an unstable surface such as a stand.
■ Keep mobile phones and other wireless communication devices away
from the computer.
Data Verification
To verify that data has been written or rewritten correctly to a data CD/DVD
you should follow the steps below before you begin the write/rewrite
process:
1. Display the setting dialog box by one of the following two steps:
■ Click the Recording settings button ( ) for writing on the main
toolbar in the Data Disc mode.
■ Select Settings for Each Mode Data CD/DVD in the Settings
menu.
2. Mark the Verify Written Data check box.
3. Select File Open or Full Compare mode.
4. Click the OK button.
How to learn more about TOSHIBA Disc Creator
Please refer to the Help files for additional TOSHIBA Disc Creator
information.
TOSHIBA DVD PLAYER
This software is provided for playback of DVD Video.
It has an on-screen interface and functions. Click Start All Programs
TOSHIBA DVD PLAYER TOSHIBA DVD PLAYER.
For details on how to use TOSHIBA DVD PLAYER, see the help file.
Please be aware of the following limitations when you use the TOSHIBA
DVD PLAYER: