Toshiba SATELLITE M30X - Manual (Page 137)

User’s Manual 8-16
Troubleshooting
LAN
You place a call, but a
connection can't be
made.
Make sure the settings are correct in your
communications application.
After making a call you
can't hear a ring. Make sure the tone or pulse selection in your
communications application is set correctly.
Communication is cut
off unexpectedly. The computer will automatically cut off
communication when connection with the carrier
is not successful for a set time interval. Try
lengthening this time interval.
A CONNECT display
is quickly replaced by
NO CARRIER.
Check the error control setting in your
communications application.
Character display
becomes garbled
during a
communication.
In data transmission, make sure the parity bit and
stop bit settings correspond with those of the
remote computer.
Check the flow control and communication
protocol.
You cannot receive an
incoming call. Check the "rings before auto answer" setting in
your communications application.
If problems persist, contact your dealer.
Problem Procedure
Problem Procedure
Cannot access LAN
LAN jack and the
Wake up on LAN does
not work.
Check for a firm cable connection between the
LAN HUB.
Make sure the AC adaptor is connected. You
cannot access a LAN using the computer's
battery power.
If problems persist, consult your LAN
administrator.