Toshiba SATELLITE M30X - Manual (Page 106)

User’s Manual 6-13
Power and Power-Up Modes
Power-up modes
The computer has three power-up modes:
■ Hibernation (saves data in memory to the hard disk)
■ Standby (Power remains on, saving data in RAM, but the CPU and all
other devices enter sleep mode.)
■ Boot (does not save data in memory)
Panel power off/on
You can set up your computer so that power turns off automatically when
you close the display panel.
When you open the panel, power turns on in Standby Mode or Hibernation
Mode but not in boot mode.
System automatic Standby/ Hibernation
This feature automatically turns off the system into either Standby Mode or
Hibernation Mode if the computer is not used for a set duration.
Refer to the Special Features section in Chapter 1, Introduction for an
explanation of how to set the duration.
Refer also to the section Turning off the power in Chapter 3, Getting
Started.
If the panel power off function is enabled and you use Shut down
Windows, do not close the display until the shut down function is
completed.