Screen saver, Hdmi control – Toshiba XDE600 User Manual
Page 37

37
Function setup
Screen Saver
To turn on or off the screen saver (screen protection to
prevent image burn).
1) Press SETUP button.
2) Press / button to select Misc.
3) Press button, then use the / button to select
Screen saver.
4) Press ENTER button, then use the / button to
select the On or Off mode.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
HDMI Control
: Off
Screen saver
Off
On
Note
When you leave the unit in DVD stop mode for approximately
2 minutes, the screen saver of the DVD player automatically
appears if you set the Screen saver to On mode. To turn
off the screen saver, press the PLAY button.
HDMI Control
You can control this DVD unit from TV’s remote which is
connected via HDMI cable.
1) Press SETUP button.
2) Press / button to select Misc.
3) Press button, then use the / button to select
HDMI Control.
4) Press ENTER button, then use the / button to
select the On or Off mode.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Screen saver
: On
HDMI Control
Off
On
Off: To deactivate HDMI Control.
On: To activate HDMI Control.
Functions available for the HDMI Control
•
One touch play
When the operations with following buttons of this
unit’s remote control are performed, the TV will
automatically switch to appropriate input channel.
Button for one touch play: [PLAY] (make sure a disc
is inserted.)
•
System information
Get & Set Menu Language:
This unit recognizes the OSD languages set for the TV
and automatically set the same language as the player
menu language (OSD menu language) for this unit.
Power
off:
When you turn the TV off, this unit will automatically
turn off.
Receiving operational signal from TV’s Remote:
You can operate this unit with TV’s remote control.
Check your TV owner’s manual for details.
Notes
•
This function may not work properly depending on
the TV you are connecting.
•
If the Video out is not set to “HDMI”, HDMI Control
will not work.
• Other components must be compatible with HDMI
Control in order to use this function.