Toshiba XDE600 - Manual (Page 17)

17
Basic pla
ybac
k
Notes
• Do not move the DVD player during playback. Doing so may damage
the disc.
• Use the OPEN/CLOSE button to open and close the disc tray. Do
not push the disc tray while it is moving. Doing so may cause the
DVD player to malfunction.
• Do not push up on the disc tray or put any objects other than discs on
the disc tray. Doing so may cause the DVD player to malfunction.
• In many instances, a menu screen will appear after playback of a
movie is completed. Prolonged display of an on-screen menu may
damage your television set, permanently etching that image onto
its screen. To avoid this, be sure to press the STOP button on your
remote control once the movie is completed.
Playing a Disc
This section shows you the basics on how to play a disc.
CAUTION
Keep your fi ngers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
Preparations
• When you want to view a disc, turn on the TV and select the
video input connected to the DVD player.
• When you want to enjoy the sound of discs from the audio
system, turn on the audio system and select the input
connected to the DVD player.
Notes
• If the disc tray is holding a disc you have already played, playback
will begin from the location where you last stopped. For resuming
playback, see
18 .
• Some video CD are recorded with PBC (Playback Control), a
menu with recorded contents may appear on the TV if you have
turned the PBC on. You can make your selection according to
its PBC menu. Press the PBC button on the remote control to
turn PBC on or off anytime during Video CD playback. When
switching from PBC off to PBC on mode, playback will start from
the beginning of the disc. To turn on the menu display again, press
the RETURN button.
To pause playback (still mode)
Press PAUSE/STEP during playback.
To resume normal playback, press the
PLAY button.
• The sound is muted during still
mode.
To stop playback
Press STOP.
To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray
opens completely.
To start playback in the stop mode
Press PLAY.
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during
a normal broadcast may appear on the TV screen while
playing a DVD because the high resolution pictures on
these discs include a lot of information. While the amount
of noise depends on the TV you use with this DVD player,
you should generally reduce the sharpness adjustment on
your TV when viewing DVDs.
If you insert a DVD that contains a top menu, a
menu may appear. Use
/ / / to select the
title you want to view, then press ENTER to start
playback.
• You may need to press the TOP MENU or MENU
button to display disc menu (depending on the actual
DVD.)
Press the ON/STANDBY button on the
front panel or the POWER button on the
remote control.
The DVD player turns on.
Press OPEN/CLOSE.
The disc tray opens.
Place the disc on the disc tray.
With the playback
side down
• There are two different disc sizes. Place the disc in
the correct guide on the disc tray. If the disc is out
of the guide, it may damage the disc and cause the
DVD player to malfunction.
• Do not place a disc which is unplayable in this DVD
player.
Press OPEN/CLOSE to close the disc tray.
Playback starts.
1
2
3
4
Basic playback
Be sure to press the OPEN/CLOSE
button to close the disc tray after you
remove the disc.
To turn the power off
Press ON/STANDBY on the front panel or POWER
button on the remote control to turn the unit off.
Automatic Power Off function
If the DVD player is stopped, or the screen saver is
engaged for approximately 20 minutes, the DVD player will
automatically turn itself off.
POWER