Toshiba M6363 - Manual (Page 77)

77
Engl
ish
CONTROLS AND FEATURES
PC Settings
Connect the PC (as shown in the ‘Connecting a computer’
section) and ensure that a picture is showing on the
television screen. The picture position may now be
adjusted to suit personal preference.
a
Press and
B
/
b
to highlight Picture icon.
b
Press c and B / b to select Display Settings and
press OK.
c
Press
B
/
b
to select PC Setting and press OK.
d
Press
B
/
b
to select an option and press
C
/
c
to
adjust the settings.
The Clock Phase matches the PC signal with the LCD
display. Adjusting this can clear horizontal stripes and
picture blur.
a
In the Display Settings menu, press
B
/
b
to
select PC Settings and press OK.
b
Press
B
/
b
to select Clock Phase.
c
Press
C
/
c
to adjust until the picture clears and
press OK.
Adjusting the Sampling Clock alters the number of pulses
per scan, this will clear vertical lines on the screen.
a
In the Display Settings menu, press B / b to
select PC Settings and press OK.
b
Press B / b to select Sampling Clock.
c
Press C / c to adjust until the picture clears.
Use Reset to return all items to the original factory
settings.
a
In the Display Settings menu, press B / b to
select PC Settings and press OK.
b
Press
B
/
b
to select Reset and press OK.
NOTE: When a PC is connected using HDMI, none of
these functions will be available.
The screen is disrupted momentarily when adjusting PC
Settings. This is not a sign of malfunction.
The default settings and adjustment ranges may vary
depending on the input signal format.
Horizontal and Vertical Position
Clock Phase
Auto Format On
4:3 Stretch Off
Picture Position
PC Settings
< Display Settings
< PC Settings
Horizontal Position 0
Vertical Position 0
Clock Phase 0
Sampling Clock 0
Reset
Sampling Clock
Reset