Toshiba M6363 - Manual (Page 26)

26
En
g
lis
h
SETTING UP YOUR TV
When Ant/Cable/Satellite is set to Cable, DTV Manual
Tuning items are as follows:
Frequency: Input a specific frequency to be scanned
Modulation: Choose from one of five QAM modulation
options
Symbol Rate: Input a specific baud rate (KS/s) to be used
for the manual scan
Highlight Start Scan and press OK.
When Ant/Cable/Satellite is set to Satellite, DTV Manual
Tuning items are as follows:
Press
B
/
b
to highlight an item (Satellite, Transponder,
Frequency, Symbol Rate, Polarisation or Search
Option) and press
C / c to select the required option.
Highlight Start Scan and press OK.
DTV Settings
The channel order may be changed to suit your personal
preference.
a
Select DTV Settings from the Installation menu
and press OK.
b
Press b to select Channels and press OK.
c
For your convenience, you can jump to specific
places in the list by one of two methods.
Line Number Jump — Use the number
buttons (0-9) to input the line number you want to
select and press OK.
It is also possible to change the Position number of
a particular channel.
Renumber — Press the RED button to
renumber the highlighted channel. Edit the
channel number using the number buttons and
press OK. If the position number you input already
exists, a confirmation window will appear.
Manual Tuning for DVB-C
Manual Tuning for DVB-S
Satellite ASTRA 28.2°E
Transponder 1/83
Frequency 10714 MHz
Symbol Rate 22000 KS/s
Polarisation H
Search Option Free to Air
DTV Manual Tuning - Satellite
Signal Strength
WEAK AVERAGE STRONG
Signal Quality POOR
Start Scan
Channels (Antenna/Cable)
Channels
Subtitle and Audio
Parental PIN Setup
Parental Control
Local Time Setting
Standby Channel Update
Common Interface
< DTV Settings
1 ABC ONE
2 ABC TWO
7 ABC THREE
30 CABC Channel
40 ABC NEWS 24
51 ABCi
822 AA
823 AC
Channels
Line No. 1/10
Pos. Name
Antenna TV
Pos. Name
ABC ONE