Using hybrid tv standard (if available), Using intel® wireless display, Wireless display – Toshiba M6363 User Manual

Page 59: Using intel

Engl

ish

CONTROLS AND FEATURES

Using Hybrid TV Standard
(if available)

Hybrid TV Standard enables the TV to receive
HbbTV services. TV services which support this
feature often show “press RED” on the screen.

NOTE: You need to configure a home network before
using this feature (see page 12).

Press

and

to highlight Options icon.

Press

and

to select Hybrid TV Standard.

Press

and

to change from Disabled to

Enabled and press OK.

When “press RED” is indicated on the screen,
press the RED button to access HbbTV service
site, and then press

BbC c

to select the desired

contents.

NOTE:
• The HbbTV service indication or required key operations

may not be possible depending on the service contents.
In this case set the Hybrid TV Standard setting to
Disabled.

• Toshiba makes no warranties, representations, or

assurances about the content.

Using Intel

Wireless Display

Intel

Wireless Display (Intel

WiDi) is

supported on this TV. You can use your TV as
second display for PC with Intel

Wireless

Display.

Press QUICK to open the Quick Menu.

Press

B / b to select Intel

WiDi and press OK.

A prompt will appear on the screen. Select Yes.

Launch the Intel

WiDi software on your PC and

select “scan for available adaptors”.

Intel

WiDi device name and ID list will then be

displayed on the PC screen.

Select the TV which you wish to connect to.

“Connecting” will be shown on the TV.

Connecting your PC to your TV the first time

When selecting the Toshiba TV for the first time, a
4-digit or 8-digit code will appear on your TV
screen. This code needs to be inputted into your
computer to authenticate the connection.

If authentication has already taken place

“Connected to Intel

WiDi. Please Wait” will

appear on screen.

After the Intel

WiDi connection is complete, the

TV screen will mirror the content shown on the PC
screen.

NOTE:
• When connecting Intel

WiDi, PC must have power

turned on.

• When the Intel

WiDi software is active, and the

Connection Type is set to Wireless, other applications
may not be usable.

• Intel

WiDi device name of the TV can be changed from

the Intel

WiDi software.

To exit Intel

WiDi:

Exit Intel

WiDi by pushing the disconnect button on Intel

WiDi software or by pressing EXIT on the TV remote
control.

NOTE: If the PC has been inactive for some time, the
Intel

WiDi connection will be disconnected automatically.