beautypg.com

Toshiba Satellite A110 (PSAB0) User Manual

Page 37

background image

User’s Manual

2-2

The Grand Tour

DC IN LED

The DC IN LED indicates the computer is

connected to the AC adapter and it is plugged into

an AC power source.

Power LED

In normal operating mode, the Power LED is

green or blue (depending on the model you

purchased). If the system is in Standby Mode the

LED will flash amber, while the LED will be off

when the computer is turned off or is in

Hibernation Mode.

Battery LED

The Battery LED indicates the battery's current

charge/discharge status. It lights green or blue

(depending on the model you purchased) when

the battery is fully charged. It lights amber while

the battery is being charged from the AC adapter.

It flashes amber when the battery capacity is low.

Hard Disk Drive LED

The Hard Disk Drive LED indicates that the hard

disk drive is being accessed. Every time your

computer runs a program, opens a file, or

performs some other function in which it must

access the hard disk drive, this light will go on.

Multiple Digital Media

Card Slot Access LED

The Multiple Digital Media Card Slot Access LED

lights up when the Multiple Digital Media Card is

accessed.
(The availability of this function depends on the

model you purchased.)

Multiple Digital Media

Card Slot

The Multiple Digital Media Card Slot allows you to

use media cards from digital still cameras and

various forms of portable information equipment.
(The availability of this function depends on the

model you purchased.)

Wireless

Communication

Switch

The wireless communication switch turns on the

wireless networking transceiver. The Wireless

Communication LED beside it indicates that

wireless networking is turned on.

Wireless

Communication LED

Indicates whether the Wireless devices is active

or not.

Microphone Jack

The standard 3.5 mm mini microphone jack

enables connection of a three conductive type

mini-jack for a monaural microphone.

Headphone Jack

The headphone jack lets you connect stereo

headphones or other audio-output devices such

as external speakers. Connecting headphones or

other devices to this jack automatically disables

the internal speakers.

Volume Control

Use this dial to adjust the volume of the stereo

speakers or headphones.

This manual is related to the following products: