Utilities, Utilities -9 – Toshiba Satellite A110 (PSAB0) User Manual
Page 31
User’s Manual
1-9
A110 Features
Utilities
This section describes preinstalled utilities and tells how to start them. For
details on operations, refer to each utility's online manual, help files or
readme files.
Panel Power Off/On
This feature turns power to the computer off when
the display panel is closed and turns it back on
when the panel is opened. You can specify the
setting in the TOSHIBA Power Saver utility.
Low Battery
Automatic
Hibernation
When battery power is exhausted to the point that
computer operation cannot be continued, the
system automatically enters Hibernation Mode
and shuts itself down. You can specify the setting
in the TOSHIBA Power Saver utility.
Hibernation
This feature lets you turn off the power without
exiting from your software. The contents of main
memory are saved to the hard disk. When you
turn on the power again, you can continue
working right where you left off. Refer to the
section in Chapter 3,
, for details.
Standby
In Standby Mode, power to the system remains
on, but the processor and all other devices are
effectively in 'sleep mode'. When the computer is
in Standby Mode, the Power LED flashes amber.
The computer enters Standby Mode regardless of
the Hibernate Mode setting. Refer to the
, for details.
■
Before entering Standby mode, be sure to save your data.
■
Do not install or remove a memory module while the computer is in
Standby mode. The computer or the module could be damaged.
■
Do not remove the battery pack while the computer is in Standby mode.
Data in memory will be lost.