Toshiba Qosmio G30 HD-DVD (PQG31) - Manual (Page 208)

10-18 User’s Manual
Troubleshooting
i.LINK (IEEE1394) device
Video Playback
Problem Procedure
i.LINK device does not
function
Make sure the cable is securely connected to the
computer and to the device.
Make sure the device’s power is turned on.
Click start, click Control Panel and double-click
the Add Hardware icon. Follow the on-screen
directions.
Restart Windows.
If problems persist, contact your dealer.
Problem Procedure
DVD does not play
smoothly when using
the Windows Media
Center Edition of the
DVD playing software
Try setting the configuration in the BIOS setup.
However, note that when the BIOS setup
configuration is modified, the power saving
function of PCI Express becomes disabled. Refer
to Chapter 7, HW Setup , for more information.
Set the PCI Express Link ASPM in the BIOS
setup using the following steps:
1. Press the F1 key. The BIOS setup screen will
appear.
2. Set the PCI Express Link ASPM to “Disabled”
in BATTERY.
3. Press the End key. A confirmation message
will appear.
4. Press the Y key. The BIOS setup will
terminate and the computer will reboot.
If problems persist, contact your dealer.