Connecting the set-top box, Starting to watch tv – Toshiba Qosmio G30 HD-DVD (PQG31) User Manual
Page 145

User’s Manual
8-15
Using the Remote Controller, Front operation panel and QosmioPlayer
Connecting the set-top box
1. Connect the VIDEO-IN cable that is bundled with the computer.
2. Insert the output cable plug for connecting to the set-top box to the
audio input terminals (red: audio right, white: audio left) and the video
input connector (yellow) of the VIDEO-IN cable.
3. Connect the other end of the output cable plug to the output terminals of
the set-top box.
Connection method for the computer and set-top box
Starting to watch TV
Perform the following procedures to watch TV.
1. Activate Media Center.
2. Activate MV TV.
For details on operating method, refer to the Help in Media Center.
Use the bundled VIDEO-IN cable and connect to VIDEO-IN
port on the right side of the comuter.
CATV cable
(sold separately)
Coaxial cable
(sold separately)
AV cable
(sold separately)