S-video-in, S-video-in -25, Video-in – Toshiba Qosmio G30 HD-DVD (PQG31) User Manual
Page 187
User’s Manual
9-25
Optional Devices
c. From the Full screen device drop down menu, select Primary
display or Secondary display to enable movie display on an
external TV or CRT monitor.
Primary Device: Movies will be displayed full screen on the
computer’s internal LCD and in a window on the TV or CRT monitor.
Secondary Device: Movies will be displayed full screen on the TV
or CRT monitor and in a window on the computer’s internal LCD.
Disable: Movies will not be displayed on a TV or CRT monitor.
d. Click OK.
e. Click OK in the Display Properties screen.
VIDEO-IN
Refer to chapter 8,
Using the Remote Controller, Front operation panel and
for details on how to connect and use the computer with the
VIDEO-IN cable.
S-Video-in
This port allows you to import video data from analog video cameras or
video decks by connecting your computer to this type of device. Imported
video can be edited or written to a DVD disk.
1. Insert one end of the S-Video-in cable into the S-Video-in port of your
computer.
Connecting the S-Video-in port
2. Insert the other end of the S-Video-in cable into the output port of the
analog device you wish to connect. To hear sounds, use a video cable
to connect the sound terminals of the audio device and your computer
(red: sound, right channel, white: sound, left channel).
■
Even if the above does not set up, there are some as which the movies
is simultaneously displayed depending on the type of the movies.
■
This settings is not available on the some application like Media
Center.
S-Video-in port