Brother HL 2040 - Manual (Page 12)

10
Setting Up Your Printer
Do NOT connect the interface cable.
You will be prompted to connect the
interface cable during the driver
installation.
1
Make sure that the printer power switch is
off.
Connect the AC power cord to the printer.
2
Plug the AC power cord into an AC outlet.
Turn the power switch on.
3
After the printer has finished warming up,
the Ready LED stops blinking and stays
green.
4
Press the Go button. The printer prints a
test page.
Check that the test page has printed
correctly.
4 Print a Test Page
Unfold the Support flap.
This function won’t be available after
the first print job you send from your
PC.
Go to the next page
to install the driver.
Step 1