Specifications 39, Specifications, Additional information – Pioneer VSX-D510 User Manual
Page 39: Maintenance of external surfaces

39
En
Amplifier Section
Continuous Power Output (STEREO MODE)
FRONT .... 80 W + 80 W (DIN 1 kHz, THD 1.0 %, 8
Ω)
Continuous Power Output (SURROUND MODE)
FRONT .................... 80 W/ch (1 kHz, THD 1.0 %, 8
Ω)
CENTER ...................... 80 W (1 kHz, THD 1.0 %, 8
Ω)
SURROUND ............ 80 W/ch (1 kHz, THD 1.0 %, 8
Ω)
• Above specifications are applicable when the power
supply is 230V.
Input (Sensitivity/Impedance)
CD, VCR/DVR, CD-R/TAPE/MD, DVD/LD, TV/SAT
........................................................ 200 mV/47 k
Ω
Frequency Response
CD, VCR/DVR, CD-R/TAPE/MD, DVD/LD, TV/SAT
......................................... 5 Hz to 100,000 Hz dB
Output (Level/Impedance)
VCR/DVR REC, CD-R/TAPE/MD REC
....................................................... 200 mV/2.2 k
Ω
Tone Control
BASS ............................................... ± 6 dB (100 Hz)
TREBLE ........................................... ± 6 dB (10 kHz)
LOUDNESS ............. +9 dB/+9 dB (100 Hz/10 kHz)
Signal-to-Noise Ratio
[DIN (Continuous rated power output/50 mW)]
CD, VCR/DVR, CD-R/TAPE/MD, DVD/LD, TV/SAT
............................................................ 88 dB/64 dB
VIDEO Section
Input (Sensitivity/Impedance)
VCR/DVR, DVD/LD, TV/SAT ................ 1 Vp-p/75
Ω
Output (Level/Impedance)
VCR/DVR ............................................. 1 Vp-p/75
Ω
Frequency Response
VCR/DVR, DVD/LD, TV/SAT
→ MONITOR
................................................ 5 Hz to 7 MHz
dB
Signal-to-Noise Ratio ............................................ 55 dB
Specifications
+0
–3
+0
–3
Additional Information
FM Tuner Section
Frequency Range ....................... 87.5 MHz to 108 MHz
Usable Sensitivity
........................ Mono:13.2 dBf, IHF (1.3 µV/ 75
Ω)
50 dB Quieting Sensitivity .................... Mono: 20.2 dBf
Stereo: 38.6 dBf
Signal-to-Noise Ratio ............... Mono: 73 dB (at 85 dBf)
Stereo: 70 dB (at 85 dBf)
Signal-to-Noise Ratio (DIN) ...................... Mono: 62 dB
Stereo: 58 dB
Distortion .................................... Stereo: 0.5 % (1 kHz)
Alternate Channel Selectivity ............... 60 dB (400 kHz)
Stereo Separation ..................................... 40 dB (1 kHz)
Frequency Response ................ 30 Hz to 15 kHz (±1dB)
Antenna Input (DIN) .......................... 75
Ω unbalanced
AM Tuner Section
Frequency Range ........................ 531 kHz to 1,602 kHz
Sensitivity (IHF, Loop antenna) ...................... 350 µV/m
Selectivity .............................................................30 dB
Signal-to-Noise Ratio ............................................ 50 dB
Antenna ................................................... Loop antenna
Miscellaneous
Power Requirements
UK model ....................................... AC 230 V, 50/60 Hz
European model ................... AC 220 – 230 V, 50/60 Hz
Power Consumption ........................................... 220 W
In Standby .............................................................. 1 W
Dimensions ............... 420 (W) x 158 (H) x 391 (D) mm
Weight (without package) .................................... 8.7 kg
Furnished Parts
AM loop antenna ......................................................... 1
FM wire antenna .......................................................... 1
Dry cell batteries (AA size IEC R6P) ............................. 2
Remote control ............................................................ 1
Operating instructions ................................................. 1
NOTE:
• Specifications and the design are subject to possible
modifications without notice, due to improvements.
Maintenance of External Surfaces
• Use a polishing cloth or dry cloth to wipe off dust and dirt.
• When the surfaces are dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with
water, and wrung out well, and then wipe again with a dry cloth. Do not use furniture wax or cleansers.
• Never use thinners, benzine, insecticide sprays or other chemicals on or near this unit, since these will corrode the
surfaces.