Pioneer VSX-D510 - Manual (Page 29)

29
En
SP A STEREO
TUNED
SP A STEREO
TUNED
If NO PTY is displayed it means the tuner couldn’t find
that programme type at the time of the search.
SP A STEREO
TUNED
MEMO
This function searches RDS stations preset in the 30-
channel memory. If this function is set when no stations
have been preset, “
NO PTY ” will be displayed. If the
desired PTY could not be found amongst the RDS
stations in memory, the same display appears.
Setting EON (front panel only)
1 Press BAND button to select the FM band.
EON is only broadcast on FM.
2 Tune into an EON FM station (see p. 24–26).
The box around EON indicator lights to inform you
that the currently tuned station carries the EON data
service.
3 Press the EON MODE button to select the
mode.
There are two EON modes: EON TA and EON
NEWS . EON TA will automatically search for traffic
reports and EON NEWS will automatically search for
news reports among your preset stations.
Each press changes the display as follows.
4 EON mode has been set. If the receiver finds
such information on the EON-linked
broadcast, it will automatically jump to it.
The receiver is set to receive EON information even
when it is not in TUNER mode. If such information is
found the receiver will automatically switch into
TUNER mode to pick up the EON broadcast. When
the programme ends the receiver will return to the
original mode.
When the EON mode is set the EON indicator with a
box around it ligh†s, but during actual reception of
an EON-linked broadcast the
EON indicator will
flash. An empty box in the EON indicator spot means
it is possible to pick up an EON-linked broadcast but
the receiver has not been set to do so (this will only
appear when RDS is switched on).
MEMO
• The EON mode is cancelled if you switch to AM
reception while setting EON. It starts once again
when you return to FM reception.
• Simultaneous requests for Traffic Information ( TA )
and News programmes is not possible.
• You cannot operate the MEMORY and CHARACTER/
SEARCH buttons while the EON indicator lights.
• Functions other than TUNER cannot be changed
while the EON indicator flashes (while receiving on
EON-linked broadcast).
If you want to change to a function other than
TUNER, press the
EON MODE button and turn the
EON mode off.
3 EON TA
EON NEWS
OFF
3
2
1
3
Using the Tuner