Pioneer VSX-D510 - Manual (Page 25)

25
En
Memorizing Stations
If you often listen to a particular radio station, it's
convenient to have the receiver store the frequency for
easy recall whenever you want to listen to that station.
This saves the effort of manually tuning in each time.
The VSX-D510 can memorize up to 30 stations, stored
in three banks, or classes, (A, B and C) of 10 stations
each. When memorizing FM frequencies, the receiver
also stores the MPX setting (auto stereo or mono, see
p.24), and RF ATT settings. The process for memorizing
stations is only possible from the controls on the front
panel of the receiver.
1 Tune to a station you want to memorize.
See Finding a Station and Tuning Directly to a
Station, on pages 26 and this page, for more on how
to do this.
2 Press MEMORY .
The display shows a blinking memory class.
SP A STEREO
TUNED
3 Press CLASS to select one of the three
classes.
Repeatedly pressing this button cycles through the
three available classes, A, B and C.
4 Press STATION +/– to select the desired
station memory number.
Pressing these buttons repeatedly cycles through the
10 available station memories in each class.
After choosing the location you want, the preset class
and number blink for about 5 seconds and the
receiver stores the station.
Repeat steps 1 to 4 to memorize up to 30 stations.
Tuning Directly to a Station
Sometimes, you'll already know the frequency of the
station you want to listen to. In this case, you can simply
enter the frequency directly using the number buttons
on the remote control (this function is not available
using the front panel controls of the receiver).
1 Press the MULTI CONTROL TUNER button
on the remote control or turn the MULTIJOG
DIAL on the receiver to select the tuner
mode.
2 Press the BAND button to select either FM
or AM.
Each press switches the band between FM and AM.
3 Press D.ACCESS ( DIRECT ACCESS ).
4 Use the number buttons to enter the
frequency of the radio station.
Example: To tune to 106.00 (FM), press 1 – 0 – 6 –
0 – 0
SP A STEREO
TUNED
MEMO:
• If you make a mistake while inputting the frequency,
press the D.ACCESS button twice to cancel the
frequency and start again.
MULTI CONTROL
DVD/LD TV/SAT VCR/DVR CD
LOUDNESS FUNCTION MUTING
D.ACCESS
ATT
VOL
MENU
TOP
MENU
VOL
CH
2 DSP MODE MIDNIGHT 5.1CH
CD-R/
TAPE/MD
CHANNEL
SELECT
CHANNEL
LEVEL EFFECT
ENTER
FQ
FQ
ST ST
FL REMOTE MASTER
TV CONTROL
FUNC
SIGNAL
SELECT
TEST
TONE
RECEIVER TUNER TV CONT
1 2 3 4
5 6 7 8
9 0
SOURCE CLASS MPX BAND
10 DISC
CHANNEL
DISPLAY RF ATT
2
1
3
4
Using the Tuner
2 3
4