Pioneer DEX-P99RS - Manual (Page 66)

Error messages
When you contact your dealer or your nearest
Pioneer Service Center, be sure to have the
error message recorded.
Built-in CD Player
Message Cause Action
ERROR-11, 12,
17, 30 Dirty disc Clean disc.
Scratched disc Replace disc.
ERROR-10, 11,
12, 15, 17, 30,
A0 Electrical or me-
chanical Turn the ignition
switch OFF and
back ON, or switch
to a different
source, then back
to the CD player.
ERROR-15 The inserted disc
does not contain
any data Replace disc.
ERROR-22, 23 The CD format
cannot be played
back Replace disc.
NO AUDIO The inserted disc
does not contain
any files that can
be played back Replace disc.
TRK SKIPPED The inserted disc
contains WMA
files that are pro-
tected by DRM Replace disc.
PROTECT All the files on
the inserted disc
are secured by
DRM Replace disc.
USB storage device
Message Cause Action
NO AUDIO No songs Transfer the audio
files to the external
storage device and
connect.
USB storage de-
vice with security
enabled is con-
nected Follow the USB
storage device in-
structions to dis-
able the security.
NO DEVICE The USB storage
device or iPod is
not connected to
the USB port of
this unit. Connect a compa-
tible USB storage
device.
TRK SKIPPED
The connected
USB storage de-
vice contains
WMA files that
are protected by
Windows Med-
ia
ä DRM 9/10
Play an audio file
not protected by
Windows Media
DRM 9/10.
PROTECT All the files in the
USB storage de-
vice are pro-
tected by
Windows Media
DRM 9/10 Transfer audio files
not protected by
Windows Media
DRM 9/10 to the
USB storage de-
vice and connect.
NOT COMPA-
TIBLE The USB storage
device connected
to is not sup-
ported by this
unit. Connect a USB
storage device that
is USB Mass Sto-
rage Class compli-
ant.
CHECK USB The USB connec-
tor or USB cable
is short-circuited. Confirm that the
USB connector or
USB cable is not
caught in some-
thing or damaged.
The connected
USB storage de-
vice consumes
more than 500
mA (maximum
allowable cur-
rent). Disconnect the
USB storage de-
vice and do not
use it. Turn the
ignition switch to
OFF, then to ACC
or ON and then
connect the com-
pliant USB storage
device.
ERROR-19 Communication
failure Perform one of the
following opera-
tions.
–Turn the ignition
switch OFF and
back ON.
–Disconnect or
eject the USB sto-
rage device.
–Change to a dif-
ferent source.
Then, return to the
USB source.
ERROR-23 USB storage de-
vice is not for-
matted with
FAT16 or FAT32 USB storage de-
vice should be for-
matted with FAT16
or FAT32.
Additional Information
En
66
Appendix