Pioneer DEX-P99RS - Manual (Page 13)

Storing and recalling broadcast
frequencies
You can easily store up to six broadcast fre-
quencies for later recall.
! Six stations for each band can be stored in
memory.
1 Use MULTI-CONTROL to store the se-
lected frequency in memory.
Turn to change the preset number. Press and
hold to store.
2 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station. Press to select.
# All stations stored for FM bands can be re-
called from each independent FM band.
# You can also change the station by pushing
MULTI-CONTROL up or down.
# To return to the ordinary display, press B.
# If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.
# You can also recall radio station frequencies
assigned to preset tuning numbers by pushing
MULTI-CONTROL up or down during the fre-
quency display.
Receiving PTY alarm broadcasts
When the emergency PTY code broadcasts,
the unit receives it automatically (
ALARM ap-
pears). When the broadcasting ends, the sys-
tem returns to the previous source.
! An emergency announcement can be can-
celed by pressing TA/News, SRC/Off, B or
MULTI-CONTROL.
Introduction to advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
3 Turn MULTI-CONTROL to select the
function.
BSM (best stations memory)
—Regional (re-
gional)
—Local (local seek tuning)—
PTY search (program type selection) —
Traffic Announce (traffic announcement
standby)
—Alternative FREQ (alternative fre-
quencies search)
—News interrupt (news
program interruption)
Notes
! To return to the ordinary display, press B.
! If you do not operate functions within about
30 seconds, the display automatically returns
to the ordinary display.
! If MW/LW band is selected, you can only se-
lect BSM or Local.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies.
1 Use MULTI-CONTROL to select BSM in
the function menu.
Refer to Introduction to advanced operations
on this page.
2 Press MULTI-CONTROL to turn BSM on.
The six strongest broadcast frequencies are
stored in the order of their signal strength.
# To cancel, press MULTI-CONTROL again.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
Operating this unit
En
13
Section
02
Operating
this
unit