Pioneer LX03 - Manual (Page 25)

Getting started 04
25
En
Engli
sh
Françai
s
Deut
sc
h
Ne
d
erlan
ds
Italiano
E
spañol
Basic playback controls
The following table shows the basic controls on
the remote for playing discs.
1 You can find
other playback features in chapter 6.
Resume and Last Memory
2
With the exception of DVD-Audio, SACD and
MP3/WMA/MPEG-4 AAC discs, when you stop
playback of a DVD, CD, or Video CD/Super VCD
or DivX video/WMV discs, Resume is shown in
the display indicating that you can resume
playback again from that point.
If the disc tray is not opened, the next time you
start playback the display shows Resume and
playback resumes from the resume point. (If
you want to clear the resume point, press
 (stop) while Resume is displayed.)
With DVDs and Video CD/Super VCDs, if you
take the disc out of the player after stopping
playback, the last play position is stored in
memory. If the next disc you load is the same
one, the display shows Last Memory and
playback will resume.
3 For DVD-Video discs,
the player stores the play position of the last
five discs. When one of these discs is next
loaded, you can resume playback.
Note
1 You may find with some DVD discs that some playback controls don’t work in certain parts of the disc.
Button What it does
Starts/resumes normal playback.
• If the display shows
Resume or
Last Memory playback starts from
the resume or last memory point
(see Resume and Last Memory
below).
Pauses/unpauses a disc.
Stops playback or cancels the
resume function (if the display
shows Resume).
Press to start fast reverse scanning.
Press to start fast forward scanning.
Skips to the start of the current
track, title or chapter, then to
previous tracks/titles/chapters.
Skips to the next track, title or
chapter.
Use to enter a title/chapter/track
number. Press ENTER to select.
• If the disc is stopped, playback
starts from the selected title (for
DVD), group (for DVD-Audio) or
track (for CD/SACD/Video CD/Super
VCD
).
• If the disc is playing, playback
jumps to the start of the selected
title (VR mode DVD-RW), chapter
(DVD-Video) or track (DVD-Audio*/
SACD/CD/Video CD/Super VCD).
*within the current group
/
/
CLEAR
1 2 3
4 5 6
7 8
0
9
ENTER
2 The Resume and Last memory functions may not work with some discs.
3 • The Last Memory function doesn’t work with VR format DVD-R/-RW, DVD-Audio or SACD discs.
• If you don’t need the Last Memory function when you stop a disc, you can press  OPEN/CLOSE to stop playback and open
the disc tray.
LX03_En.book 25 ページ ２００８年６月２４日 火曜日 午後６時１分