Pioneer CT-L77 - Manual (Page 39)

8 Using the Timer
39
3 Set the time to switch on.
First, set the hour:
Use the
$ and › buttons to change the flashing hour display, then
press SET .
Next, set the minute:
Use the
$ and › buttons to change the flashing minute display,
then press SET .
4 Set the switch off time.
Set the hour:
Use the
$ and › buttons to change the flashing hour display, then
press SET .
Next, set the minute:
Use the
$ and › buttons to change the flashing minute display,
then press SET .
After pressing SET , the display shows you the settings you’ve just made,
including the switch on and off times, the component, and the volume level.
The clock and sunrise symbols in the display indicate that the wake up timer
is active.
Note: for the wake-up timer to work, the system must be in standby mode,
so remember to switch the system off before going to sleep. (In standby mode
you can check the timer settings by pressing
TIMER .)
Cancelling the Wake Up Timer
The wake-up timer doesn't automatically cancel, since you may well want to have the
system switch on every morning at the same time, for example.
1 Select WAKE-UP from the timer menu.
Remember: switch between timer menu options using the
$ and ›
buttons; select the option by pressing SET .
After pressing SET , the timer indicator in the display goes out.
AUX/CD-R SOUND DISPLAY SET MD TAPE TIMER/
CHARACTER
&
CANCEL REC
$
! —
›
+ ⁄
VOL
STANDBY/ ON
TIMER SET
4 ¢
The ‘on’ time is whatever was
last set for the wake-up timer
Adjust it to what you want.
Remember: the time is
displayed as a 24-hour clock
The ‘off ’ time is automatically
set to an hour later than the
‘on’ time
Adjust it to what you want
If the clock and sunrise
indicators are lit, then when
you press
SET ...
...the wake-up timer is
cancelled
Tip
Although you can’t di-
rectly edit the wake-up
settings once they’re
made, if you cancel the
wake-up timer then set
it again, the previous
settings will show up in
the display.