Pioneer CT-L77 - Manual (Page 24)

5 Using the CD Player
24
1 Press MENU and select CD PROGRAM.
Remember: switch between menu options using the
$ and ›
buttons; select the option by pressing SET .
2 Select a track to add to the playlist using
the
$ and › buttons.
For example, to add track 3, press
› three times. Or, to add the last but one
track, press
$ twice.
3 Press SET to add the track to the playlist.
4 Repeat steps 2 and 3 to continue adding
tracks to the playlist.
If you make a mistake, press CANCEL to delete the last (most recent) track
programmed. (Delete multiple tracks by pressing CANCEL repeatedly.)
5 When you're happy with the playlist, press
MENU.
The playlist can be up to 24 tracks long.
6 Press CD button to start playback.
Checking the playlist order
You can only check the playlist order when the disc is stopped. Once stopped, you can
step through the playlist using the
$ and › buttons. Each track number on the
playlist is displayed together with the track length.
If you then press CANCEL , the total playing time of the playlist is displayed.
Deleting the playlist
If you want to delete the playlist without ejecting the disc, simply press CANCEL when
the disc is stopped.
Programming the Track Order
This mode lets you program a sequence (a playlist) of up to 24 tracks to play. The
order can be anything you choose. Tracks can appear more than once in the playlist,
or can be left out entirely. The playlist applies only to the disc in the player at the time.
Once you eject the disc (or switch the power into standby), the playlist is lost.
AUX/CD-R SOUND DISPLAY SET MD TAPE TIMER/
CHARACTER
&
CANCEL REC
$
! —
›
+ ⁄
VOL
STANDBY/ ON
MENU CD SET CANCEL
4 ¢
Track 3 has been selected as
the first track in the playlist.
The track length is also shown.
After pressing SET , the step is
memorized.
After pressing MENU , the display
shows the number of tracks in
the playlist, and the total
running time of the playlist.