Pioneer VSX-LX53 - Manual (Page 31)

Connecting your equipment 03
31
En
Connecting an iPod
This receiver has a dedicated iPod terminal that will allow
you to control playback of audio content from your iPod
using the controls of this receiver.
• Switch the receiver into standby then use the
supplied iPod cable to connect your iPod to the iPod/
iPhone/USB terminal on the front panel of this
receiver.
• It is also possible to connect using the cable included
with the iPod, but in this case it is not possible to view
pictures via the receiver.
• For the cable connection, also refer to the operating
instructions for your iPod.
• For instructions on playing the iPod, see Playing an
iPod on page 38.
Connecting a USB device
It is possible to play audio and photo files by connecting
USB devices to this receiver. It is also possible to connect
a USB keyboard (US-international layout) to the receiver
to enter text in the following GUI screens.
• Change the input name in the Input Setup menu
(page 36).
• Add names to radio station presets (page 42).
• Enter Internet radio station URLs (page 43).
• Switch the receiver into standby then connect your
USB device to the USB terminal on the front panel of
this receiver.
1
• For instructions on playing the USB device, see
Playing a USB device on page 39.
Connecting a USB device for Advanced
MCACC output
When using Auto MCACC (page 68) or Acoustic
Calibration EQ Professional (page 72) to calibrate the
reverb characteristics of your listening room, the 3D
graphs of the reverb characteristics in your listening
room (before and after calibration) can be checked on a
computer screen.
The various MCACC parameters can also be checked on
the computer.
MCACC data and parameters are transferred from this
receiver to a USB device and by connecting the USB
device to a computer, the data is imported via a special
application in the computer.
The software to output the results is available from the
support area of the Pioneer website (http://
www.pioneer.eu). Instructions for using the software are
also available here. If you have any questions about the
software, please contact the Pioneer Service Center
specified on your warranty card.
See the documentation provided with the Advanced
MCACC application for more information.
• For the USB device connection and operations, see
Output MCACC data on page 75
2
.
MENU

 
MASTER
VOLUME
MCACC SETUP MIC USB
iPod iPhone
VIDEO CAMERA
HDMI 5
CONTROL ON / OFF
iPod
iPod cable
(supplied)
Note
1 This receiver does not support a USB hub.
2 The various parameters and the reverb characteristics data used for display on the computer are not cleared when the power is turned off (see
Output MCACC data on page 75).
MASTER
VOLUME
MCACC SETUP MIC USB
iPod
iPhone
VIDEO CAMERA
HDMI 5
CONTROL ON / OFF
USB mass
storage device
USB keyboard