Pioneer AVIC-F10BT - Manual (Page 71)

Changing to the splash screen
stored in the SD memory card
You can change the splash screen that ap-
pears when the navigation system starts. Copy
your chosen image to the SD memory card,
and select the image to import.
p Splash screen images should be used with-
in the following formats;
— BMP or JPEG files
— Allowable horizontal and vertical size
are 2 592 pixels x 1 944 pixels or smaller
— Allowable data size is 6 MB or smaller
p Proper compatibility with allowable files is
not guaranteed.
p Imported original images will be stored in
the built-in memory, but the ability to save
these images cannot be guaranteed com-
pletely. If your original image data is de-
leted, insert the SD memory card again
and re-import the original image.
1 Create a folder named
“Pictures” on the
top-most directory of the SD memory card
and store the picture files in this folder.
2 Store the picture files in
“Pictures”.
3 Insert an SD memory card into the SD
card slot.
= For more details of the operation, refer to In-
serting and ejecting an SD memory card on
page 13.
4 Display the
“System Settings” screen.
5 Touch [Splash Screen].
The
“Select Splash Screen” screen appears.
6 Touch [Select from SD].
The
“Select Splash Screen” screen appears.
7 Touch the image to use as the splash
screen from the list.
The image is displayed on the screen.
8 Touch [OK].
The image is set as the splash screen, and the
system returns to the
“System Settings”
menu.
Setting for rear view camera
The following two functions are available. The
rear view camera feature requires a separately
sold rear view camera (e.g. ND-BC2). (For de-
tails, consult your dealer.)
Rear view camera
The navigation system features a function that
automatically switches to the full-screen rear
view camera image installed on your vehicle.
When the gear stick is in the REVERSE (R) po-
sition, the screen automatically switches to
full-screen rear view camera.
Camera for Rear view mode
[
Rear View] can be displayed at all times (e.g.
when monitoring an attached trailer, etc.) as a
split screen where map information is partially
displayed. Please be aware that with this set-
ting, camera image is not resized to fit, and
that a portion of what is seen by the camera is
not viewable.
CAUTION
Pioneer recommends the use of a camera which
outputs mirror reversed images, otherwise the
screen image may appear reversed.
p Immediately verify whether the display
changes to a rear view camera image when
the gearstick is moved to REVERSE (R)
from another position.
p When the screen changes to full-screen
rear view camera image during normal
driving, switch to the opposite setting in
[
Polarity].
1 Display the
“System Settings” screen.
2 Touch [Back Camera].
The
“Back Camera Settings” screen appears.
Customising preferences
Engb
71
Chapter
12
Customising
pr
eferences