Pioneer AVIC-F10BT - Manual (Page 126)

Switching the muting/
attenuation timing
You can mute the AV source volume or attenu-
ate the output signal. This setting is invalid for
the mute signal has been received from the
MUTE lead connected to the navigation unit.
(Even if this setting is [
Off], the navigation sys-
tem will mute or attenuate the audio source
volume when the signal is output via MUTE
lead.)
% Touch [Mute] on the “AV System Set-
tings
” menu.
Each touch of [ Mute] changes the settings as
follows:
! Guide/Tel — The volume is muted or atte-
nuated according to the following condi-
tions
— When the navigation outputs the gui-
dance voice.
— When you use a mobile phone via Blue-
tooth technology (dialling, talking, in-
coming call).
! Tel — The volume is muted or attenuated
according to the following conditions
— When you use a mobile phone via Blue-
tooth technology (dialling, talking, in-
coming call).
! Off — The volume does not change
p Operation returns to normal when the cor-
respond action is ended.
Switching the muting/
attenuation level
You can select the muting/attenuation level of
[
Mute]. This setting is also effective for a mute
signal that has been received from the MUTE
lead connected to the navigation unit.
p This menu is not available when AV source
is [ Off].
% Touch [Mute Level] on the “AV System
Settings
” menu.
Each touch of [ Mute Level] changes the set-
tings as follows:
! 20dB — The volume becomes 1/10
! 10dB — The volume becomes 1/3
! All — The volume becomes 0
p When you select [All], no audio adjust-
ments are possible during the sound is
turned off.
p When you select [20dB] or [10dB], no audio
adjustments are possible during the sound
is attenuated.
p Operation returns to normal when the cor-
respond action is ended.
p Even when a mute signal has been received
from MUTE lead connected to the naviga-
tion unit, navigation voice guidance cannot
be attenuated or muted.
Changing the voice output of
the navigation guidance
You can set the speaker to output the naviga-
tion guidance and phone voice, etc.
% Touch [Guidance/Tel SP] on the “AV Sys-
tem Settings
” menu.
Each touch of [ Guidance/Tel SP] changes the
settings as follows:
! L+R SP — Uses both the front right and left
speakers
! Left SP — Uses only the front left speaker
! Right SP — Uses only the front right speak-
er
Switching Auto PI seek
The navigation system can automatically
search for a different station with the same
programming, even during preset recall.
% Touch [Auto PI] on the “AV System Set-
tings
” menu.
= For details, refer to Displaying the “AV Sys-
tem Settings
” menu on page 124.
Touching [ Auto PI] switches between [On]
and [ Off].
Customising preferences
Engb
126
Chapter
28