Pioneer AVIC-F10BT - Manual (Page 67)

! [On]:
You can export your track log to the SD
card.
! [Off] (default):
You cannot export your track log to the SD
card.
# Touch [Type].
Each time you touch the key changes that set-
ting.
! [Private] (default):
Set the track log attribute to
“Private”.
! [Business]:
Set the track log attribute to
“Business”.
! [Other]:
Set the track log attribute to
“Other”.
p While the setting is [On], the navigation
system continues to store the track logs in
the inserted SD memory card.
Using the demonstration guidance
This is a demonstration function for retail
stores. After a route is set, touching this key
starts the simulation of route guidance.
1 Display the
“Navi Settings” screen.
2 Touch [Demo Mode].
Each time you touch the key changes that set-
ting.
! [On]:
Repeat demo drive.
! [Off] (default):
Demo Mode is set off.
3 Display the map screen.
The demonstration guidance will begin.
Registering your home
Registering your home position saves time
and effort. Also, routes to home positions can
be calculated easily with a single touch of the
key from the
“Destination Menu”. The regis-
tered home position can also be modified
later.
1 Display the
“Navi Settings” screen.
2 Touch [Set Home].
The
“Set Home” screen appears.
3 Touch [Home].
The
“Select Search Method” screen appears.
# Touch [Phone #].
When you have already registered your home,
you can edit your home number.
4 Search for a location.
After searching for a point, display it on a
map, then touch [
OK].
The location is registered, and then the
“Set
Home
” screen appears.
= For details, refer to Searching for and select-
ing a location on page 38.
5 Touch [OK].
The registration is completed.
Correcting the current location
Touch the screen to adjust the current position
and direction of the vehicle displayed on the
map.
1 Display the
“Navi Settings” screen.
2 Touch [Modify Current Location].
3 Scroll to the position where you want
to set, then touch [OK].
Customising preferences
Engb
67
Chapter
12
Customising
pr
eferences