BT 1050 - Manual (Page 27)

23
Remote access
Control your answering
machine from another phone
using a TouchTone
TM keypad
You can turn your Freestyle 1050 answering
machine on and off and listen to your messages
from any TouchTone
TM telephone. To protect
your privacy, messages can only be accessed by
entering a 2-digit security code.
The code is pre-set and cannot be changed.
The code can be found on the underside of the
base unit.
To check for messages
Press buttons in order shown
Dial your phone number and wait.
When you hear your outgoing message,
press the
✱ button on your phone.
You will hear a ‘Beep’.
CODE Key in the first digit of your security
code. You will hear the number you
keyed in and a ‘Beep’.
CODE Key in the second digit of your security
code. You will hear the number you
keyed in then a long ‘Beep’.
Once you have entered your security
code.
If you have no messages you will hear
“You have no messages.”
You now have 8 seconds to enter any
other instructions before your
Freestyle 1050 hangs up.
If you have messages you will hear
“You have X messages.”
Your Freestyle 1050 will then play your
messages.
REMOTE ACCESS