BT 1050 - Manual (Page 17)

13
To re-record your outgoing message,
repeat this procedure.
To record your outgoing message
Press buttons in order shown
Press and hold down the OGM button.
Your Freestyle 1050 will beep and r
flashes on the message counter.
Keep holding down the OGM button and
say your message into the microphone.
When you have finished speaking,
release the
OGM button.
Your Freestyle 1050 will beep, play
back your message, then beep to
confirm the recording. It will then
return to ‘Answer On’ mode.
To check your outgoing message
Press the OGM button.
Your Freestyle 1050 will beep, play back
your message, then beep to confirm
the recording. It will then return to
‘Answer On’ mode.
“Beep. Your message. Beep”
To switch the answering machine
on/off
Press the ANSWER ON/OFF button.
Your Freestyle 1050 will announce
“Answer off ”
.
Display shows a single dash.
Press the ANSWER ON/OFF button
again. The machine will announce
“Answer On”
.
To delete your outgoing message
You can delete your outgoing message
and return to your Freestyle 1050’s
pre-recorded outgoing message.
Press the OGM button.
“Your message”
Your outgoing message is played back
to you.
While the message is playing, press
the
DELETE button.
Your Freestyle 1050 will beep and play
its pre-recorded outgoing message.
“Hello, your call cannot be taken at the
moment, so please leave your message
after the tone.”
Your own message has now been
replaced by the Freestyle 1050’s original
pre-recorded message.
ANSWERING MACHINE
OGM
OGM
OGM
OGM
OGM
De
lete
Answer
on/off
Answer
on/off