BT 1050 User Manual

Page 13

If you go out of range

Your Freestyle 1050 has a range of 200
metres under ideal conditions.

However, if you go out of range during
a call, you will hear a series of beeps,
Move closer to the base to re-establish
the signal.

Using the Secrecy button

You can prevent your caller from
hearing you while you talk to someone
else close by.

Press the

SECRECY

button. A beep is

heard and the

IN USE

light flashes.

Your caller cannot hear you until you
press the

SECRECY

button again.

USING YOUR PHONE

c re e n

To ensure the best sound quality

Your Freestyle 1050 automatically
scans available radio channels between
the handset and base for the best quality
signal. However, if you hear noise or
interference during your call:

Press the

CHANNEL

button.

Your Freestyle 1050 will select a new
channel for you.

To store a number in the memor y

Press buttons in order shown

Press the

QUICKDIAL

button. You hear

a beep and the

IN USE

light begins to

flash.

Press one of the

0-9

buttons to set the

location code under which your phone
number will be stored.

DIAL

Dial the number you want to store.

Press the

QUICKDIAL

button. You hear

a confirmation beep. The number is
stored.

Repeat these steps for any other
numbers you want to store, using a
different

0-9

location code for each one.

Storing a number in the memor y
automatically over writes any
previous number stored under the
same location code.

Stored numbers can include those for
switchboard and network services
that use the

✱

and

buttons as well as

the PAUSE and RECALL functions.

ickdial

Using the memory to store
and dial numbers

Your Freestyle 1050 handset can store up to ten
separate phone numbers, each up to 16 digits
long. You can then dial each number by pressing
just two buttons.