Pioneer VSX-2021 - Manual (Page 23)

En 23
03 Connecting your equipment
% Switch the receiver into standby then
use the supplied iPod cable to connect
your iPod to the iPod iPhone iPad USB
terminal on the front panel of this
receiver.
! It is also possible to connect using the cable
included with the iPod, but in this case it is not
possible to view pictures via the receiver.
! For the cable connection, also refer to the
operating instructions for your iPod.
! For instructions on playing the iPod, see
Playing an iPod on page 30 .
Connecting a USB device
It is possible to play audio and photo files by
connecting USB devices to this receiver. It
is also possible to connect a USB keyboard
(US-international layout) to the receiver to enter
text in the following GUI screens.
! Change the input name in the Input Setup
menu (page 28).
! Add names to radio station presets (page 33).
USB HDMI 3 INPUT
iPod iPhone iPad
AUTO SURR/ALC/
STREAM DIRECT
STANDARD
SURROUND
ADVANCED
SURROUND
iPod iPhone iPad
DIRECT CONTROL
5V 2.1 A
USB mass
storage device
USB keyboard
% Switch the receiver into standby
then connect your USB device to the
USB terminal on the front panel of this
receiver.
! This receiver does not support a USB hub.
! For instructions on playing the USB device,
see Playing a USB device on page 31 .
Connecting an HDMI-equipped
component to the front panel
input
Video camera (etc.)
USB HDMI 3 INPUT
iPod iPhone iPad
AUTO SURR/ALC/
STREAM DIRECT HOME THX
STANDARD
SURROUND
ADVANCED
SURROUND
iPod iPhone iPad
DIRECT CONTROL
5V 2.1 A
Connecting to a wireless LAN
Wireless connection to the network is possible
through a wireless LAN connection. Use the
AS-WL300 for connection.
! The Wireless LAN converter (AS-WL300) is
included with the VSX-LX55, sold separately for
the VSX-2021.
! For instructions on setting the wireless LAN
converter, see Network Setup menu on page
69 .
! Use only the furnished accessory connecting
cable.
WAN
DC 5V WPS Ethernet
L
R
2
PRE OUT OOFER 2 SURROUND SURR BACK FH / FW
( CD)
BLE ASSIGNABLE
IN 2 ( DVR/BDR) ( TV/SAT)
OPTICAL
IN 1 IN 2 IN 3 OUT ( VIDEO)
(OUTPUT 5 V
0.1 A MAX)
ADAPTER PORT DC OUTPUT
for WIRELESS LAN (10/100)
LAN (OUTPUT 5 V 0.6 A MAX)
SURROUND BACK L R L R L(Single)
(Single)
FRONT HEIGHT / FRONT WIDE / B
Internet
Modem
Wireless LAN converter (AS-WL300)
Router
Connecting an IR receiver
If you keep your stereo components in a closed
cabinet or shelving unit, or you wish to use the
sub zone remote control in another zone, you
can use an optional IR receiver (such as a Niles
or Xantech unit) to control your system instead
of the remote sensor on the front panel of this
receiver.
! Remote operation may not be possible if direct
light from a strong fluorescent lamp is shining
on the IR receiver remote sensor window.
! Note that other manufacturers may not use
the IR terminology. Refer to the manual that
came with your component to check for IR
compatibility.
! If using two remote controls (at the same
time), the IR receiver’s remote sensor takes
priority over the remote sensor on the front
panel.
1 Connect the IR receiver sensor to the IR
IN jack on the rear of this receiver.
RS-232C
ZONE 2 IN IN IN DVR/ OUT OUT ZONE 3 OUT TV/SAT VIDEO DVD
COMPONENT VIDEO
Y P B P R
ASSIGNABLE
MONITOR OUT
(DVD) IN 1
(DVR/ BDR)
IN 2
EXTENSION
FRONT R SPEAKERS A FM UNBAL 75 AM LOOP
ANTENNA
(OUTPUT 5 V 150 mA MAX) CONTROL
IR
OUT
IN
OUT IN 1 IN 2
2
1
12 V TRIGGER
(OUTPUT 12 V TOTAL 150 mA MAX)
HDMI BD IN (VIDEO) IN 1 IN 2 IN 4 IN 5 (DVD)
ASSIGNABLE 1 6
IN
IR
IN OUT
CONTROL
Closet or shelving unit
Pioneer
component Non-Pioneer
component
IR receiver
2 Connect the IR IN jack of another
component to the IR OUT jack on the rear
of this receiver to link it to the IR receiver.
Please see the manual supplied with your IR
receiver for the type of cable necessary for the
connection.
! If you want to link a Pioneer component to
the IR receiver, see Operating other Pioneer
components with this unit’s sensor on page
24 to connect to the CONTROL jacks instead
of the IR OUT jack.