Connecting to your home network – Pioneer BCS-FS505 User Manual

Page 27

Installation

Connecting to your

Home Network

This player can be connected to a local area
network (LAN) via the LAN port on the rear
panel.

Please refer to the documentation for your
network device for further instructions.
Connect the player’s LAN port to the
corresponding port on your Modem or Router
using a commercially available LAN or Ethernet
cable (CAT5 or better with RJ45 connector).
In the example confi guration for wired
connection below, this player would be able to
access content from either of the PCs.

Network Connection

Broadband

Service

Router

WAN

LAN 1

LAN 2

LAN 3

Player

Router

Broadband

Service

Player

NOTE

• When plugging or unplugging the LAN cable,

hold the plug portion of the cable. When
unplugging, do not pull on the LAN cable but
unplug while pressing down on the lock.

• Do not connect a modular phone cable to the

LAN port.

• Since there are various connection

confi gurations, please follow the specifi cations
of your telecommunication carrier or internet
service provider.

• If you want to access content from PCs or DLNA

servers, this player must be connected to the
same local area network with them via a router.

HB485-DB.BDEUPPK_ENG.indd 27

2010-05-18 1:35:52