Pioneer BCS-FS505 User Manual

Page 26

Installation

Checking the information of connected
Bluetooth device

This function is operated after pairing. You can
check the

Bluetooth information.

Press DISPLAY repeatedly.

Bluetooth information is changed as follows.
Local

Bluetooth Device Address t Device

Name

t None t ...

NOTE

• This units dose not be supported the Mono

Headset Profi le (Hands Free Profi le).

• The sound may be interrupted when the

connection interfered by the other electronic
wave.

• You cannot control the

Bluetooth device with

this unit.

• Pairing is limited one

Bluetooth device per one

unit and multi-pairing is not supported.

• Although the distance between your

Bluetooth

and the set is less than 10 m, there are obstacles
between both, your

Bluetooth device cannot be

connected.

• Depending on the type of the device, you may

not be able to use the

Bluetooth function.

• When not connected the

Bluetooth, “BT READY”

appears on the display window.

• The Electrical malfunction due to devices using

same frequency such as Medical equipment,
Microwaves or wireless LAN devices, the
connection will be disconnected.

• When someone stands and interrupts

communication between

Bluetooth device and

the player, the connection will be disconnected.

• If the gotten away of the distance between

Bluetooth and the unit, the sound quality is lower
and lower the connection will disconnect when
the space between the

Bluetooth and the unit

gets out of the operating range of

Bluetooth.

• The device with

Bluetooth wireless technology

is disconnected, if you turn off the main unit or
put the device away from the main unit more
than 10 m.

HB485-DB.BDEUPPK_ENG.indd 26

2010-05-18 1:35:52