Specifications, Techno tidbits & problem-solving – Pioneer VSA-E08 User Manual
Page 77
77
En
Techno Tidbits & Problem-solving
Specifications
Miscellaneous
Power Requirements
UK model ...................................... AC 230 V, 50/60 Hz
European model ................... AC 220 - 230 V, 50/60 Hz
Power Consumption ............................................. 500 W
Power Consumption in Standby mode .................. 1.0 W
AC Outlets (except for the UK model)
SWITCHED (
×
2) ............................... Total 100 W MAX.
UNSWITCHED ........................................ 100 W MAX.
Dimensions .................. 420 (W)
×
173 (H)
×
470 (D) mm
Weight (without package) ....................................... 18 kg
Furnished Parts
“AA” IEC LR6 batteries ................................................. 4
Remote Control Unit with a touch pen attached ........... 1
Cushion for Remote ....................................................... 4
Operating Instructions ................................................... 1
NOTE:
Specifications and the design are subject to possible
modifications without notice, due to improvements.
Amplifier Section
Continuous Power Output (STEREO MODE)
FRONT ... 130 W + 130 W (DIN 1 kHz, THD 1 %, 6
Ω
)
Continuous Power Output (SURROUND MODE)
FRONT ... 130 W + 130 W (DIN 1 kHz, THD 1 %, 6
Ω
)
CENTER ................ 130 W (DIN 1 kHz, THD 1 %, 6
Ω
)
SURROUND ....................................... 130 W + 130 W
(DIN 1 kHz, THD 1 %, 6
Ω
)
Rated Power Output .............................. 100 W + 100 W
(20 Hz-20 kHz, THD 0.09 %, 8
Ω
)
• Above specifications are applicable when the power
supply is 230V.
Input (Sensitivity/Impedance)
PHONO MM .......................................... 4.7 mV/47 k
Ω
VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD, LINE/
TUNER, MD/TAPE 1/CD-R, TAPE 2 ....... 335 mV/47 k
Ω
Phono Overload Level (THD 0.1 %, 1 kHz)
PHONO MM ................................................... 120 mV
Frequency Response
PHONO MM ................... 20 Hz to 20,000 Hz ±0.3 dB
VCR 1/DVR, VCR 2, DVD/LD, TV/SAT,
VIDEO, CD, LINE/TUNER, MD/TAPE 1/CD-R,
TAPE 2 ................................. 5 Hz to 100,000 Hz dB
Output (Level/Impedance)
VCR 1/DVR REC, VCR 2 REC, MD/TAPE 1/CD-R REC,
TAPE 2 REC ............................................. 335 mV/1 k
Ω
Tone Control
BASS ................................................... ± 6 dB (100 Hz)
TREBLE ............................................... ± 6 dB (10 kHz)
LOUDNESS ............................ +10 dB (100 Hz/10 kHz)
Signal-to-Noise Ratio (IHF, short circuited, A network)
PHONO MM ...................................................... 80 dB
VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD,
LINE/TUNER, MD/TAPE 1/CD-R, TAPE 2 ......... 101 dB
Signal-to-Noise Ratio
[DIN (continuous rated power output/50 mW)]
PHONO MM ................................................. 68/61 dB
VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD,
LINE/TUNER, MD/TAPE 1/CD-R, TAPE 2 ...... 92/65 dB
Video Section
Input (Sensitivity) .......................................... 1 Vp-p/75
Ω
Output (Level/Impedance) ............................ 1 Vp-p/75
Ω
Signal-to-Noise Ratio .............................................. 65 dB
Frequency Response ..................... 5 Hz to 10 MHz dB
Component Video Section
Input (Sensitivity) .......................................... 1 Vp-p/75
Ω
Output (Level/Impedance) ............................ 1 Vp-p/75
Ω
Signal-to-Noise Ratio .............................................. 65 dB
+0
–3
+0
–3