Speaker setting, Initial set up – Pioneer VSA-E08 User Manual
Page 32
32
En
SPEAKER SETTING
The following steps show you how to select the correct set up for the type and number of speakers you
connected. If continuing from DIGITAL INPUT SELECT go to step 1. If starting fresh, complete steps 1-3 on p.30
first.
1 Press the SPEAKER SETTING
button.
2 Select the THX or FREE setting.
If you connected a complete set of THX speakers
Press THX. After that you only need to select the
number of SURROUND BACK speakers you have
(Step 3-5 below). Press the diagram of the
SURROUND BACK speakers to cycle through the
three choices: one, two or none and choose number
you have. Then go to step four.
If you do not have a THX speaker set up
Press FREE and follow the instructions below.
3 Specify the number and type of
speakers you connected by pressing
on the speakers in the diagram.
1 Select Large (three dots) or small (two dots) for the
front speakers depending on whether your front
speakers can handle low bass sounds and whether
or not you hooked up a subwoofer.
2 Select or deselect center speaker depending on
whether or not you hooked one up. Also choose
the size, large or small.
3 Select or deselect subwoofer depending on
whether or not you hooked one up. Also select
PLUS if you have a subwoofer and want extra bass
sound.
4 Select or deselect surround speakers depending
on whether or not you hooked them up. Also
choose large or small.
5 Select or deselect surround back speakers depend-
ing on whether or not you hooked them up. Also
choose large or small and one or two.
Depending on your choices the sound will be
routed differently. For more information see
below.
FRONT (default setting is LARGE)
• Select small to send bass frequencies to the
subwoofer.
• Select large if your speakers will reproduce bass
frequencies effectively or if you did not connect a
subwoofer.
(If you select small for the front speakers the
subwoofer will automatically be switched YES.
Also, the center and surround speakers cannot be
set to large if the front speakers are set to small. In
this case, all bass frequencies are sent to the
subwoofer.)
CENTER (default setting is LARGE)
• Select large if your speaker will reproduce bass
frequencies effectively.
• Select small to send bass frequencies to the other
speakers or subwoofer.
• If you did not connect a center speaker, deselect it.
In this case, the center channel is output from the
front speakers.
«
To confirm what drawings represent which
speakers in the LCD display on your remtore control
see the diagrams below, which continue on to the
next page. You can choose two, one or no
SURROUND BACK speakers (and their size) by
repeatedly pressing on their image in the diagram.
1
memo
TWO (DOUBLE) SURROUND BACK
SPEAKERS
System Setup
SPEAKER
SETTING
CROSSOVER
NETWORK
BASS PEAK LEVEL
MANAGER
DYNAMIC RANGE
CONTROL
DIGITAL INPUT
SELECT
CHANNEL DELAY
CHANNEL LEVEL
BACK
+
+
+
+
+
+
+
Speaker Setting
SETUP
OK
FREE
THX
BACK
Front
L
Center
Front
R
Sub
woofer
Surround
L
Surround
back
Surround
R
L
Surround
back
R
Speaker Setting
SETUP
OK
FREE
THX
+
+
+
+
+
+
+
3
-
1
3
-
4
3
-
4
3
-
2
3
-
5
3
-
3
3
-
1
2
BACK
Initial Set Up