Selecting a sound mode using surround sound, Selecting a sound mode, 1 press the amp – Pioneer VSA-E08 User Manual
Page 44: 2 select the sound mode, Using surround sound, Basic playback
44
En
Basic Playback
1 Press the AMP.
This sets the remote to select the sound mode.
(You can skip this step when using the controls on
the amplifier.)
2 Select the sound mode.
• For STANDARD
\ Press STANDARD
Each press changes the STANDARD mode as follows:
STANDARD
STANDARD 7.1
STANDARD auto
• For HOME THX CINEMA
\ Press THX(THX CINEMA
on the front panel).
Each press changes the THX mode as follows:
THX CINEMA
THX SURR EX
THX AUTO
• For ADVANCED THEATER
\ Press ADVANCED
THEATER(ADVANCED on the front panel)
Each press changes the ADVANCED THEATER mode
as follows:
MUSICAL
DRAMA
ACTION
5/7-D THEATER
• For DSP modes
\ Press DSP(DSP MODE on the
front panel) repeatedly
Each press changes the DSP mode as follows:
5/7CH STEREO
THEATER 2
THEATER 1
HALL 1
HALL 2
JAZZ
DANCE
• For STEREO
\Press STEREO (STEREO/DIRECT on
the front panel)
Each press changes the STEREO mode as follows:
STEREO
DIRECT
• If you have SURROUND BACK speakers switched on
(see p.32-33) then 7-D THEATER and 7CH STEREO
will appear as such in the display on the amplifier. If
these speakers are not switched on the above two
modes will appear as 5-D THEATER and 5CH
STEREO.
• The effects of ADVANCED THEATER mode can be
adjusted in the range of 10 to 90 by pressing EFFECT
+/– (The default setting is 70). Also, the effect level
can be set in each ADVANCED THEATER mode by
pressing the EFFECT(+/–) button.
• The amount of effect of each DSP mode can be
adjusted in the range of 10 to 90 (the default setting
value is 70) by pressing EFFECT +/–.
• 5/7CH STEREO modes cannot be changed.
Selecting a Sound Mode
To ensure the best possible surround sound, be sure to complete the set up procedures described in “Setting
Up for Surround Sound” (starting on page
30) before using the sound modes. This is particularly important when
using the 2(Dolby) Digital / MPEG or DTS sources. When using the sound modes, using SPEAKERS A will give
the best results. If you use SPEAKERS B the sound will be down mixed to the two front B speakers.
Using surround sound
DSP MODE
STEREO/
DIRECT
THX CINEMA
ADVANCED
STANDARD
memo
1
AMP
DVD/LD
TV/SAT
VCR1
VCR2
REMOTE
SETUP
MD/TAPE1
CD
LINE/
TUNER
TV
CONTROL
Amplifier
MAIN
SUB
DSP
STEREO
THX
ADVANCED
THEATER
EFFECT
STANDARD
MIDNIGHT
LOUDNESS
SIGNAL
SELECT
DIGITAL
NR
/ dts / MPEG
MULTI CH
IN
DSP
STEREO EFFECT +/–
THX
ADVANCED
THEATER
STANDARD
EFFECT/
CH SELECT
+/–