Pioneer AVIC-F950BT - Manual (Page 164)

Symptom Cause Action (Reference)
No video output from the con-
nected equipment. The
“AV1 Input” or “AV2 Input” set-
ting is incorrect.
Correct the settings. (Page 116)
The audio or video skips. The navigation system is not firmly
secured. Secure the navigation system firmly.
No sounds are produced.
The volume level will not rise. Cables are not connected correctly. Connect the cables correctly.
The system is performing still, slow
motion, or frame-by-frame playback
with DVD-Video. There is no sound during still, slow motion, or
frame-by-frame playback with DVD-Video.
The system is paused or performing,
fast reverse or forward during the
disc playback. For the media other than music CD (CD-DA),
there is no sound on fast reverse or forward.
The icon 9 is displayed, and op-
eration is impossible. The operation is not compatible
with the video configuration. This operation is not possible. (For example,
the DVD playing does not feature that angle,
audio system, subtitle language, etc.)
The picture stops (pauses) and
the navigation system cannot be
operated. The reading of data is impossible
during disc playback. Stop playback once, then restart.
The picture is stretched, with an
incorrect aspect ratio. The aspect setting is incorrect for
the display. Select the appropriate setting for that image.
(Page 96)
A parental lock message is dis-
played and DVD playback is not
possible. The parental lock is on. Turn the parental lock off or change the level.
(Page 96)
The parental lock for DVD play-
back cannot be cancelled. The code number is incorrect. Input the correct code number. (Page 96)
Playback is not with the audio
language and subtitle language
settings selected in
“DVD/
DivX® Setup ”.
The DVD playing does not feature
dialogue or subtitles in the lan-
guage selected in
“DVD/DivX®
Setup ”.
Switching to a selected language is not possi-
ble if the language selected in
“DVD/DivX®
Setup ” is not recorded on the disc. (Page 95)
The picture is extremely unclear/
distorted and dark during play-
back. The disc features a signal to prohibit
copying. (Some discs may have
this.) Since the navigation system is compatible
with the copy guard analogue copy protect
system, the picture may suffer from horizon-
tal stripes or other imperfections when a disc
with that kind of protection signal is viewed
on some displays. This does not mean the na-
vigation system is malfunctioning.
iPod cannot be operated. The iPod is frozen. ! Reconnect the iPod with the USB interface
cable for iPod.
! Update the iPod software version.
An error has occurred. ! Reconnect the iPod with the USB interface
cable for iPod.
! Park your vehicle in a safe place, and turn
off the engine. Turn the ignition key back to
off (ACC OFF). Then restart the engine, and
turn the power to the navigation system back
on.
! Update the iPod software version.
Cables are not connected correctly. Connect the cables correctly.
Engb
164
Appendix
Appendix