Pioneer AVIC-F950BT - Manual (Page 144)

! A “Custom2” curve can be created com-
mon to all sources. If you make adjust-
ments when the
“Custom2” curve is
selected, the
“Custom2” curve will be up-
dated.
! The “Custom1” curve is applied to each of
the sources selected, but you can apply the
same curve to the following sources.
— AV1 and AV2
— CD, ROM, DVD-V, and DivX
— SD and USB
— Bluetooth Audio and Aha Radio
(Bluetooth connection)
— iPod and Aha Radio (iPhone)
1 Display the
“AV Sound Settings”
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 141.
2 Touch [EQ Menu].
3 Touch one of the keys to select a curve
that you want to use as the basis of custo-
mising.
4 Touch [Customize].
5 Touch the frequency for which you
want to adjust the level.
6 Touch [a] or [b] to adjust the level of
the equaliser band.
Each time you touch [a] or [b], the level of
the equaliser band increases or decreases.
Using the auto-adjusted equaliser
You can set the auto-adjusted equaliser to suit
the vehicle
’s acoustics. To use this function,
the vehicle
’s acoustics must be measured in
advance.
= For details of the operations, refer to Adjust-
ing the equaliser curve automatically (Auto
EQ) on page 146.
p To manually adjust the equaliser curve, set
“Auto EQ” to “Off”.
1 Display the
“AV Sound Settings”
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 141.
2 Touch [EQ Menu].
3 Touch the key next to
“Auto EQ” to
turn the auto-adjusted equaliser on or off.
4 Select the equaliser curve.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
p Settings are based on the FM tuner volume
level, which remains unchanged.
p You cannot select [SLA] when the FM tuner
is selected as the AV source.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Display the
“AV Sound Settings”
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 141.
3 Touch [SLA].
4 Touch [+] or [
–] to adjust the source vo-
lume.
“+8dB” to “–8dB” is displayed as the source
volume is increased or decreased.
Engb
144
Chapter
26 Customising preferences