Pioneer PDP-428XD - Manual (Page 30)

Setting up 08
30
En
Basic picture adjustments
Adjust the picture to your preference for the chosen AV Selection
option (except DYNAMIC).
1 Press HOME MENU.
2 Select “Picture” ( / then ENTER).
3 Select an item to be adjusted ( / then ENTER).
For PC source or when the Home Gallery function is on, the
following screen appears;
4 Select the desired level ( /).
When an adjustment screen is in display, you can also change the
item to be adjusted, by pressing
/.
5 Press HOME MENU to exit the menu.
For AV source
For PC source
Note
• To perform advanced picture adjustments, select “Pro Adjust”
in step 3 and then press ENTER. For the subsequent procedures
see Advanced picture adjustments on page 31.
• To restore the factory defaults for all items, press / to select
“Reset” in step 3, and then press ENTER. A confirmation screen
appears. Press / to select “Yes”, and then press ENTER.
• You may experience a sudden change in the image position and
screen brightness when you open the “Picture” menu.
Picture
AV Selection
Contrast
Brightness
Colour
Tint
Sharpness
Pro Adjust
Reset
OPTIMUM
40
0
0
0
0
Picture
AV Selection
Contrast
Brightness
Red
Green
Blue
Reset
STANDARD
40
0
0
0
0
Contrast 40
Item  button  button
Contrast For less contrast For more contrast
Brightness For less brightness For more brightness
Colour For less colour intensity For more colour
intensity
Tint Skin tones become
purplish Skin tones become
greenish
Sharpness For less sharpness For more sharpness
Item  button  button
Contrast For less contrast For more contrast
Brightness For less brightness For more brightness
Red For weaker red For stronger red
Green For weaker green For stronger green
Blue For weaker blue For stronger blue
PDP-508XD.book Page 30 Thursday, April 26, 2007 2:34 PM