Pioneer PDP-428XD - Manual (Page 22)

Watching TV 06
22
En
Changing the volume and sound
Use the remote control or the control panel on the right-hand side
of the plasma television to adjust the volume.
Using i +/i – on the remote control unit
• Press i + to increase the volume.
• Press i – to decrease the volume.
• VOLUME +/– on the plasma television operates the same as
i +/i –.
Using e on the remote control unit
1 Press e to mute the sound.
e appears on the screen.
2 Press e again or i + to restore the sound.
Switching the broadcast audio channel
Depending on the broadcast, you can switch the audio channel.
• Press - to change the audio channel.
The table below shows the available audio channels by broadcast
audio type.
Note
• In each of the sound multiplex mode selected using the -
button, the display changes depending on broadcasting signals
being received.
• Once the MONO mode is selected, the sound remains mono
even if the system receives a stereo broadcast. You must switch
the mode back to
 or  mode if you want to hear stereo sound
again.
• Selecting a sound multiplex mode while the input source is
“INPUT 1” to “INPUT 5” does not change the type of sound. In
this case, sound is determined by the video source.
7 8 9
PC 0
INFO
INPUT 5
TV/DTV
SELECT
TV STB
DVD/
DVR VCR
SOURCE
P
Volume adjustment
Muting
DVD HDD DISC
NAVI
HDMI
CONTROL
mode mode MONO mode
I II MONO
1
AAA
NICAM STEREO
10:00
1
AAA
NICAM STEREO
10:00
1
AAA
MONO
10:00
2
BBB
NICAM I
10:00
2
BBB
NICAM II
10:00
2
BBB
MONO
10:00
3
CCC
NICAM MONO
10:00
3
CCC
NICAM MONO
10:00
3
CCC
MONO
10:00
4
DDD
STEREO
10:00
4
DDD
STEREO
10:00
4
DDD
MONO
10:00
5
EEE
DUAL I
10:00
5
EEE
DUAL II
10:00
5
EEE
MONO
10:00
6
FFF
MONO
10:00
7
GGG
STEREO
10:00
6
FFF
MONO
10:00
7
GGG
STEREO
10:00
6
FFF
MONO
10:00
7
GGG
MONO
10:00
NIC
AM Broadc
asts
A2 Broadc
asts
Digital Broadc
asts
Stereo
Bilingual
Monaural
Stereo
Bilingual
Monaural
Setting
MONO
PDP-508XD.book Page 22 Thursday, April 26, 2007 2:34 PM