Pioneer AVIC-85DHV-2 - Manual (Page 28)

26
How to Listen to a CD with Built-in DVD Player
(AVIC-9DVD
— — — — only)
In case of AVIC-8DVD — — — — , you cannot play CD with the Navigation System.
If you insert a CD into this unit, the CD is automatically played. You can select a track, or turn
Repeat range, Random play or Scan play ON/OFF.
■How to use the Remote Control
When playing a CD, you must switch the operation mode of the Remote Control. Once the
operation mode is switched to DVD, the following operations become available with the
Remote Control.
(1) Operation mode switch
When you play DVD-Video or CD, set this switch to
DVD.
(2) SOURCE button
This button is used to turn “NAVI Source” ON/OFF.
When CD is played, the playback is stopped. If you
press again, play is resumed from the section where
you stopped previously.
(3) Cross Key 2 2 2 2, 3 3 3 3, 5 5 5 5, ∞ ∞ ∞ ∞ button
These are used when selecting items such as skipping
a track of a CD, return to a previous track, fast-for-
ward or fast-rewind.
(4) A.MENU (AUDIO) button
CD Function menu is shown while CD is playing.
(5) BACK/FUNC button
This button is used for returning to a previous screen
in the CD Function menu.
(6) BAND/ESC button
This button is used when returning to the CD play
screen from the CD Function menu.
Before listening to a CD
In order to avoid damaging a disc or the main unit, before inserting a disc, make sure that
no disc is set in the Disc loading slot.
➲
For inserting and removing a disc, see Chapter 1 “Setting and removing the disc”.
When operating the Pioneer DVD player connected to the AV Head Unit, see Chapter 6
of the Operation Manual, “How to use the Remote Control”.
NAVI/AV
N/A
/FUNC
BACK
MENU
TOP
MENU
DETOUR
CANCEL
ROUTE GUIDE
1
4 3
6 5
2