Pioneer AVIC-85DHV-2 - Manual (Page 12)

10
Setting Switch 3
Setting Switch 3 ON/OFF determines which DVD code from A to C is transmitted from the
Remote Control. Depending on the combination with a Pioneer DVD player, you need to
change the position of the switch. (If you use units with the same code, when you press a
remote control button all these units will respond, making operation troublesome.) See the
corresponding section from Setting A to Setting D set in “Setting Switch 1 and 2” described
above.
Setting A
Switch 3 is not to be used (It does not matter whether it is ON or OFF.)
When the Operation Mode switch is set to “AUDIO”, you can operate units that receive A
code signals.
When the Operation Mode switch is set to “DVD”, you can operate units that receive B code
signals.
Setting B
Setting C and D
Setting Switch 4
When the Operation Mode switch is set to “NAVI”, set using VOL dial depending on the
equipment you want to adjust.
➲
Please set the switches correctly according to the combination of your equipment. Please
make sure that the setting is correct, otherwise the Navigation System will not work prop-
erly.
Units receiving A code signals : XDV-P9 (XDV-P9 — )
Units receiving B code signals : AVIC-9DVD, AVIC-9DVD —
Units receiving C (DVH code) code signals : DVH-P7000R
Units that can be set to receive both A and B codes : AVX-P7300DVD, SDV-P7
ON : When the Operation Mode switch is set to “AUDIO”, you can operate units that
receive A code signals.
When the Operation Mode switch is set to “DVD”, you can operate units that receive
B code signals.
OFF : When the Operation Mode switch is set to “AUDIO”, you can operate units that
receive C code signals.
When the Operation Mode switch is set to “DVD”, you can operate units that receive
B code signals.
ON : You can operate units that receive A code signals.
OFF : You can operate units that receive B code signals.
When the Operation Mode switch is set to “AUDIO”, only the operation with the
NEXT/PREV control, control stick, and the PLAY/PAUSE button is possible.
When the Operation Mode switch is set to “DVD”, you can perform all DVD opera-
tions.
ON : Volume of the voice guidance of Navigation system is adjusted.
OFF : Volume of Pioneer Head Unit (including Pioneer AV master unit) is adjusted.