Before using built-in dvd player, Difference of the source screen – Pioneer AVIC-85DHV-2 User Manual
Page 24

22
Before Using Built-in DVD Player
You can set DVD or CD into the Disc loading slot of the Navigation System and play it (AVIC-
9DVD
—
only). Check the type of disc that can be played with this unit. Also, to play a disc, you
must switch the operation mode of the Remote Control. Once the operation mode is switched,
the function of each button changes (see page 26 and 29).
■Difference of the source screen
Although the operation is almost the same when the Navigation System is used alone or when
it is used in combination with Pioneer AV Head Unit (AVH-P6400CD, AVH-P6400R), the
screen display will be slightly different.
When the Navigation System is combined with Pioneer AV Head Unit, the built-in DVD player
can be switched by SOURCE button of the AV Head Unit as “NAVI SOURCE”.
➲
If the dipswitches of the Remote Control and Operation mode switch are set incorrectly, the
Navigation System will not be operated properly even when the buttons are pressed. If it
does not operate properly, see “Selecting dipswitches” on page 9 and “About Operation
mode switch” on page 12, and check whether the setting of the dipswitches is correct.
Track No. 01
02’45”
Track No. 01
02’45”
When used alone (CD)
When combined with Pioneer AV
Head Unit (CD)
1 Eng
02 Eng
1
Dolby D 5.1ch
Title
Chap 003
Time 010:30
01
When used alone (DVD)
When combined with Pioneer AV
Head Unit (DVD)