Pioneer VSX-859RDS-G - Manual (Page 84)

Using Other Functions
84
En
Recording from Audio Components
The following explanations show you how to record an analog or digital audio signal. Note that your analog
components cannot record a player that is only connected digitally (and vice-versa). If you want to record from a
digital component to an analog one (for example, a tape deck), or vice-versa, the digital component it must be
connected via analog jacks and you need to set the SIGNAL SELECT switch to ANALOG. To make exact digital
copies (of digital sources like CDs) both the source component and the recorder must be connected with digital
connections. See p.12 for more on analog audio connections and p.13 for digital audio connections.
The receiver's volume, channel level, balance, tone (BASS, TREBLE, and LOUDNESS), and surround
effects have no effect on the recorded signal and the MULTI CHANNEL IN cannot be recorded.
In some cases, digital recordings have copy guard protections and making a digital copy is not possible.
In this case you can only copy them in an analog manner.
1 Select the source component.
2 Press RECEIVER (VSX-839RDS only).
3 Set the SIGNAL SELECT according to the
source component's signal (ANALOG or
DIGITAL).
Press the SIGNAL SELECT button on the remote control (or use
the button on the front panel) and choose ANALOG
4 Start recording with a recorder.
5 Playback the source to be recorded.
Record monitor (TAPE 2 MONITOR)
If you connect a cassette deck with a record monitor function to the
TAPE 2 MONITOR jacks, you can listen to the sound of an analog
recording as it is being recorded.
Press TAPE 2 MONITOR to switch between the sound of the
recording (TAPE 2 indicator on) and the sound of the source
component (TAPE 2 indicator off).
memo
S0URCE
DVD/LD TV/SAT VCR1 VCR2
CD CD-R/
TAPE1 TUNER TVCONT
RECEIVER
USE SETUP
MULTI
OPERATION
CLASS MPX DIRECT ACCESS
STATION TUNING
BAND
SYSTEM
OFF
Î
¶ 8 7 3
+ - + -
MULTI CONTROL
1
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
/DTS/MPEG
MENU
ENTER
STEREO/
DIRECT DSP
THX LIGHT
MUTE
FUNCTION
REMOTE SETUP
SYSTEM SETUP
INPUT
ATT
ADVANCED
MIDNIGHT MULTI CH
INPUT
STANDARD
DIGITAL NR
EFFECT/
CH SEL
SIGNAL
SELECT
+
–
3
TAPE 2 MONITOR
SOURCE
LOUDNESS
INPUT ATT DIGITAL NR FL DIMMER
REMOTE SETUP SYSTEM SETUP SIGNAL SELECT
TV VOL TV
TVFUNK
D.ACCESS BAND
MENU
CLASS
MPX
CHANNEL
EFFECT/CH SEL
RECEIVER
TV CONTROL
MASTER VOLUME
VIDEO SELECT
MULTI CONTROL
MULTI CH INPUT
DVD
CD CD-R TUN TVC
RECEIVER
1 2 3
4 5 6
7 8 9
! ⁄
0
* ‹ &
TV VCR
1 VCR
2
4 ¢
¶
ENTER
TUNE
TUNE
ST ST
3
2
1
DISC +10
TOP MENU
DISPLAY RF ATT
VSX-859RDS
VSX-839RDS