Pioneer VSX-859RDS-G - Manual (Page 62)

62
En
Using the Tuner
Memorizing a broadcast station name (Manual Station Name Memory)
• You can input a name of up to four characters for each preset broadcast station (see page 60).
• The memorized name takes priority over PS data.
1 Select the TUNER function
2 Press the CLASS button repeatedly to select
one of the classes.
CLASS A CLASS B CLASS C
3 Press the STATION +/– buttons to select the
preset channel.
4 Press the CHARACTER/SEARCH button to
select the character input mode.
When FM is selected:
INPUT
(Character input mode)
OFF SEARCH
5 Press the TUNING +/– buttons (or turn the
MULTI JOG dial) to enter the broadcast
station name.
Refer to “Character display used for station name input” on
p. 99.
6 Press MEMORY (or the MULTI JOG dial) to
input the first of four characters. After four
characters have been entered, the character
input mode is exited.
Repeat steps 2 to 4 to memorize up to 30 broadcast station
names.
* When this button is set to
OFF, the frequency being
received will be displayed.
To erase and change the memorized station name
Perform the procedures of “Memorizing a broadcast station name” and enter four spaces to erase the
memorized station name.
When you want to change a memorized station name, input the new station name using the same procedure.
In order to remember what frequencies you input into which station numbers it might be helpful
write down the station names you input in the table provided on p. 99.
When AM is selected:
INPUT
(Character input mode)
OFF
memo
memo
1 3 2 4
5 6
memo
• See p. 99 for are all the possible
characters you can input.