Baracoda BaracodaPencil2 - Manual (Page 8)

BaracodaPencil2 – Programming Guide v1.7 - 8 -
Data Capture
for Workforce
in Motion
1.4/ Reading Mode
In trigger mode, pressing the trigger will activate the beam.
Trigger (*)
The “No duplicate scan” option has been developed for users who do not want to scan the same barcode
twice.
« no duplicate scans » disabled (*)
« no duplicate scans » enabled + error signal
If the same barcode is scanned, an error signal is played (two beeps (lower tone) and a red
enlightening of the led)
« no duplicate scans » enabled + no decoding
If the same barcode is trying to be scanned, it won’t be. The laser beam will still be enlightening.