Baracoda BaracodaPencil2 User Manual
Page 17
BaracodaPencil2 – Programming Guide v1.7
- 17 -
Data Capture
for Workforce
in Motion
1.9.2/ Postrefix/postsuffix
You can add a postprefix and/or a postsuffix (strings of more than 32 characters will not be accepted) to every
barcode sent to the host device. (Feature enabled for CPU firmware version ≥ 1.09)
There is no postprefix/postsuffix in default settings.
POST Prefix on
POST Prefix off (*)
POST Suffix on
POST Suffix off (*)
*= max length of the Suffix (Prefix) is 32 characters
Set postprefix
Set postsuffix
End of configuration
END of Config
Read « Set postprefix (postsuffix) » label
START
Read intermediary label
Corresponding to the next character to set for the
Finished
*?
Read «
END
of config » label
END
NO
YES
Programming procedure for “set postprefix (postsuffix)” option.