Baracoda BaracodaPencil2 - Manual (Page 28)

BaracodaPencil2 – Programming Guide v1.7 - 28 -
Data Capture
for Workforce
in Motion
3.14/ Set min or Max length option
The following is a procedure to follow for every barcodes.
Read « Start - Set min (Max) length » label
START
Read intermediary label
Corresponding to the next digit of the min (Max) length
Finished ?
Read « END of config » label
END
NO
YES
Programming procedure for “set min (Max) length” option.
Read intermediary label from the below
table