beautypg.com

Using the shooting modes, Basic operations, Point-and-shoot” photography ( p program mode) – Olympus E-PM2 User Manual

Page 24: 24 en, Program shift ( % ), Cautions

background image

24 EN

Basic operations

2

Using the shooting modes

“Point-and-shoot” photography (P program mode)

In mode P, the camera automatically adjusts shutter speed and aperture in response
to subject brightness. Select P as the shooting mode.

250

250 F5.6

01:02:03

01:02:03

38

38

L

N

P

0.0

0.0

ISO-A

200

FullHD

F

Shooting mode

Shutter speed Aperture value

• The shutter speed and aperture selected by the camera are displayed.
• The shutter speed and aperture displays fl ash if the camera is unable to achieve

optimal exposure.

Warning display

example (blinking)

Status

Action

60"

60" F2.8

F2.8

The subject is too
dark.

• Use the fl ash.

4000

4000 F22

F22

The subject is too
bright.

• The metered range of the camera is

exceeded. A commercially available ND
fi lter (for adjusting the amount of light) is
required.

• The aperture value at the moment when its indication blinks varies with the lens type and

focal length of the lens.

• When using a fi xed [ISO] setting, change the setting.

g [ISO] (P. 55)

Program shift (

%)

In P and

ART modes, you can press the F button (F) and

then use

FG to choose different combinations of aperture

and shutter speed without altering exposure.This is known
as “program shift.” “s” appears next to the shooting mode
during program shift. To cancel program shift, press and
hold

FG until “s” is no longer displayed or turn the camera

off.

#

Cautions

• Program shift is not available when you are using a fl ash.

250

250 F5.6

P

s

0.0

0.0

01:02:03

01:02:03

38

38

L

N

ISO-A

200

FullHD

F

Program shift

This manual is related to the following products: