Olympus E-3 - Manual (Page 91)

91
EN
8
Customizing your camera
P SET UP
Selects the operation of the dials or arrow pad when selecting the AF target.
[OFF] Stops after moving to the AF target on the end.
[LOOP] After moving to the AF target on the end, moves to the AF target on the
opposite end of the same row or column. Selects all AF targets before moving
to the AF target on the opposite end, and [AF AREA] is set to B.
[SPIRAL] After moving to the AF target on the end, moves to the AF target on the
opposite end of the next row or column. Selects all AF targets before moving
to the AF target on the opposite end, and [AF AREA] is set to B.
RESET LENS
When set to [ON], this resets the focus of the lens (infinity) each time the power is turned off.
BULB FOCUSING
You can set the camera to enable focus adjustments during bulb shooting with MF.
[ON] During exposure, you can turn the focus ring and adjust the focus.
[OFF] The focus is locked during exposure.
Custom Menu 1b BUTTON/DIAL
DIAL
In P, A, S, or M mode, you can assign functions other
than the default functions to the main dial and sub dial. You
can also switch the operations of the main dial and sub dial
for menu operations with the default operations.
P : [ %]/[F]/[w]
A : [FNo.]/[F]/[w]
S : [SHUTTER]/[F]/[w]
M : [SHUTTER]/[FNo.]
MENU : [F]/[G]
• [F] on [MENU] means the horizontal operation of the
dial (the same as pressing bd). [G] means the
vertical operation of the dial (the same as pressing
ac).
e.g.) When moving from the top left AF target to the right
[OFF] [SPIRAL] [LOOP]
Set to B. Set to B.
Ps
DIAL P
CANCEL SELECT GO
Sub dial Main dial
DIAL MENU
CANCEL SELECT GO
F G
bd ac
s0011_e_00_0_unified.book Page 91 Wednesday, September 12, 2007 4:46 PM